The gas pressure regulator is a special tool used in conjunction with household liquefied gas cylinders. Although the product is small, its quality is directly related to the safety of thousands of households. When purchasing products such as gas pressure regulators, care should be taken carefully and not cheap.
1. The first thing to do is to purchase the products of well-known brands in large shopping malls and supermarkets. Consumers should check the mark on the regulator when purchasing. It depends on the name of the company, address, telephone number, etc. Method; see if there is a production permit number on the regulator housing, try not to buy a bulk regulator.
2. The outlet pressure of the regulator is too high. In the application, the heat load of the burner will increase, that is, “fire”, but if the skill is not enough, the safety hazard will be even greater. The corresponding regulator should be selected according to the gas flow rate of the gas appliance used. For example, the household gas cooker of Fujian and Taiwan uses JYT0.6 type regulator, the domestic gas blast water heater of 8 liters or more, or the household gas cooker of Jiatai, and the domestic gas blast water heater of 8 liters or less below the base. Type regulator.
3. The regulator's device and liquefied gas should be used correctly. The regulator should be installed according to the level of demand, the front side, the incorrect method of the device is not easy to operate, and the liquefied gas bottle should be placed upright.
4. The layout of the gas pressure regulator should be safe and reliable. Do not purchase a regulator that can be modified at will. Do not use the JYT1.2 regulator for gas appliances with low gas flow such as household gas cookers; when the type and standard of the regulator do not correspond to the gas cooker, do not artificially change the setting of the regulator; When the flame is high or low, it is clarified that the pressure regulator is now damaged and should be replaced in time. When a strong gas smell is found, the liquefied gas cylinder should be closed in time to see if the regulator has a leaky appearance. Gas should be stopped and replaced in time.
5. Daily self-testing can leak. Use a thick detergent and soapy water to change the seam of the regulator housing and its front and rear joints, then open the valve of the liquefied gas cylinder. If there is foam, it will indicate the appearance of air leakage and should be replaced in time.
